A Troy water damage inspection isn't a walk-through with a flashlight. It's a systematic, instrument-driven assessment that produces a written report showing exactly where the water went, how saturated each affected assembly is, and what needs to happen next.
Here's what makes our Troy inspection service more than a visual walk-through.
FLIR infrared thermal cameras detect temperature differentials in structural surfaces — a wet wall cavity cools differently than a dry one during evaporation, making moisture migration visible as a thermal signature even behind intact drywall. Our Troy inspection team uses thermal imaging as the primary tool for tracing water migration paths through wall systems, subfloor assemblies, and ceiling cavities, identifying affected areas before a single pin is driven into a wall.
Qualitative assessment says "it looks wet." Quantified readings say "this framing is at 28% moisture content and the dry standard is 10%."
Every COS Water Damage Restoration Troy water damage inspection produces a written report: affected area descriptions, thermal images with annotations, moisture meter readings at labeled sensor points, water category determination (Cat 1/2/3), and a recommended scope of work with priority sequencing. Reports are formatted to be useful to your insurance carrier, a remediation contractor, or a real estate transaction where water damage disclosure is at issue.
Both use cases are available in Troy — contact us with your specific situation and our inspector will scope the right assessment.
Here are the specific inspection scenarios and assembly types our Troy team handles.
Active event inspection is the step that prevents under-scoped remediation and missed hidden damage.
Real estate transactions in Troy frequently involve properties with prior water events — disclosed and undisclosed. Our pre-purchase inspection uses thermal imaging and moisture meters to identify active moisture in structural assemblies, staining patterns consistent with prior water intrusion, and the condition of previous remediation. For Troy buyers, this inspection provides either confidence that a disclosed water event was properly handled, or documentation that it was not — giving the buyer negotiating leverage and a clear picture of what additional remediation cost, if any, is warranted.
After a water damage remediation project is completed in a Troy property — whether by COS Water Damage Restoration or another company — a verification inspection confirms that structural drying was completed to standard moisture content levels and that no hidden moisture was left behind. This inspection is requested by property owners who want independent confirmation of completion, by landlords who need documentation before returning a property to tenancy, and by sellers who need to demonstrate to a buyer that prior water damage was fully resolved. Our Troy post-remediation inspection produces a written verification report formatted for real estate and insurance use.
Mold risk assessment in Troy is distinct from air quality testing. We assess structural conditions and visible evidence — not air samples.
Below-grade moisture in Troy properties is underdetected and underlies a significant portion of structural issues discovered later.
Our Troy inspection reports are formatted to the documentation standards that insurance carriers use to evaluate water damage claims in NY.


Same-day scheduling available for active water events. Pre-purchase inspections booked on your transaction timeline.
Our Troy inspector arrives with FLIR thermal camera, calibrated pin-type and non-penetrating moisture meters, and inspection documentation tools. The inspection begins with a thermal pass of all suspected affected areas, followed by direct meter readings at all thermally identified locations. Each reading is recorded at a labeled sensor point location on the floor plan.
After the on-site assessment, your Troy inspector reviews the key findings with you — which areas are affected, what the readings indicate, what water category applies, and what remediation is indicated. If you have questions about specific readings or want to understand what a particular finding means, this is the conversation for it. The verbal review happens on-site.
Report delivered in the format your use case requires, within 48 hours of inspection.



"The thermal imaging session was what sold me on how a proper Troy water damage inspection should work. Our inspector traced water migration I never could have guessed at — the event in the utility room had spread moisture into the adjacent storage room wall framing more than twelve feet away. The written report documented all of it and our remediation contractor used it directly to scope the drying project."
"We used the COS Water Damage Restoration Troy inspection report to file a homeowner's claim for a water damage event. The adjuster reviewed the thermal image documentation and sensor point readings and approved the full remediation scope on first submission. The inspection report paid for itself many times over by eliminating the supplement process."
"The post-remediation verification inspection is what I most value. After our last Troy property water event, the remediation contractor signed off on completion. We had COS Water Damage Restoration do a verification inspection and found one wall section with framing still above 15% moisture content. That section would have been a mold problem within weeks. The verification inspection caught it before it became our problem."
COS Water Damage Restoration's certified inspection team serves Troy and surrounding communities throughout NY. Call +1-844-499-0972 to schedule your Troy inspection.
Visible water damage is easy to find. The moisture behind your walls and under your floors is what causes the mold problem three months later. Call +1-844-499-0972 and our Troy inspection team brings the instruments to find all of it.
📞 Call +1-844-499-0972 — Schedule Troy InspectionIICRC Certified · FLIR Thermal Imaging · Written Reports · Troy, NY